Extended Warranties for Semi-Trucks
 

Extended Warranties - Call us at 816-517-3333

Extended Warranties

SCHEDULE OF COVERED COMPONENTS INCLUDED WITH APPLICABLE COVERAGE:

  • ENGINE: Internally lubricated hard parts limited to pistons, piston rings, piston oil cooling jets, wrist pins, connecting rods, connecting rod bearings, crankshaft, main bearings, thrust washers, camshaft and cam bearings, cam followers, rocker arms shafts, rocker arms, pushrods, hydraulic lifters, intake and exhaust valves, intake and exhaust valve guides, valve springs, constant velocity valve, oil pump housing, oil pump gears, oil pump pick up screen, oil pump pick up tube, oil pump pressure relief springs, oil pump pressure relief valves, valve retainers, valve keepers (locks), timing chain and gears, timing chain tensioners, timing gear cover, valve cover, oil pan, oil cooler and housing. The following “non-oil” related components are covered: intake manifold, exhaust manifold, flywheel housing, vibration dampener, and thermostat housing. Cylinder liners are considered an integral part of the block. They along with the block and cylinder heads are covered only if damaged by a covered component. Damage resulting from failures by related components but not limited to: seals and gaskets, radiators, cooler lines, jake brakes, thermostat, motor mounts, and electronic control devices are not covered. Fuel pump failure due to contamination is not covered.

 

  • TRANSMISSION: Internally lubricated hard parts of the Manual or Automatic transmission including shaft(s), gear sets, shift forks, synchronizers, blockers, oil pump, valve body, torque converter, governor, bands, drums, gear sets, bearings, bushings and thrust washers. The transmission case is covered only if damaged by a covered component. Required Seals and Gasket to complete covered repairs. Damage resulting from the failures of related components but not limited to: seals and gaskets, electronic controls, shift levers, linkage, radiators, mounts, external and internal oil coolers and lines, manual transmission clutch-disc, clutch-disc of an electronically controlled, non-hydraulically operated (has no torque converter)transmission, sliding clutch(es),pressure plate, throwout bearing, pilot bearing, hydraulic clutch master and slave cylinder(s) are not covered.

 

  • REAR: Internally lubricated hard parts including carrier case, gear sets, bearings, bushings, axle shafts, limited slip clutchpack, and power divider including: shafts, gears, bearings, and shift fork. Required seals and gaskets to complete covered repairs. The differential housing is covered only if damaged by a covered component. Damage resulting from the failures of related components but not limited to: seals and gaskets, electronic controls, shift levers, linkage, radiators, mounts, external oil coolers and lines are not covered.

 

  • TURBOCHARGER(S): Turbochargers include: turbines, turbine shaft, bearings, internal variable vane assembly, and turbocharger housing. Does not include: wiring harnesses, wastegates; oil, fuel, or coolant lines; external fittings, clamps, bolts, or fasteners, charge air cooler and duct work, injector seals, cups or tubes, EGR valves and associated components, linkages, connectors, V Pod, actuators, seals & gaskets, vacuum controls or electrical components. Damage from contaminated fuel, incorrect or low lubricants, or coolant not covered.

 

  • ENGINE FUEL INJECTORS, WATER PUMP, FUEL PUMP & ECM: Engine Fuel Injectors include: complete injector, fuel pump, fuel injector hard lines, fuel injection pump, and intake manifold. Water Pump includes: water manifold, housing, impeller, bearings, and seals. Electronic Control Module (ECM): The ECM unit and the labor to remove and replace it is covered. Coverage does not include: upgrades, design changes, alteration, or modification whether by OEM or aftermarket, wiring harness or any related electrical system or component malfunction, contamination, or corrosion; wastegates; oil, fuel, or coolant lines; external fittings, clamps, bolts, or fasteners, charge air cooler and duct work, injector seals, cups or tubes, EGR valves and associated components, linkages, connectors, V Pod, actuators, seals & gaskets, vacuum controls or electrical components. Damage from contaminated fuel, incorrect or low lubricants, or coolant not covered.

 

  • AFTERTREATMENT COMPONENTS – DPF, EGR, SCR, DOC, DEF TANK, & DOSER INJECTORS are covered with the exception of seals, gaskets, hoses and fasteners (i.e. bolts, nuts, fasteners, etc.) APU ENGINE COMPONENTS: Engine Components: Internally lubricated hard parts limited to pistons, pistons rings, piston oil cooling jets, wrist pins, connecting rods, connecting rod bearings, crankshaft, main bearings, thrust washers, camshaft and cam bearings, cam followers, rocker arm shafts, rocker arms, push rods, hydraulic lifters, intake and exhaust valves and guides, valve springs, constant velocity valve, oil pump housing, oil pump gears, oil pump pick up screen, oil pump pick up tube, oil pump pressure relief springs and valves, valve retainers, valve keepers (locks), timing chain and gears, timing chain tensioners, timing gear cover, valve cover, oil pan, injectors and water pump. Any Damage resulting from a seal leak or a blown head gasket is not
    covered

Available Terms vary on mileage (cannot exceed 1,000,000 miles)

  • 1 year or 125,000 miles
  • 2 year or 250,000 miles
  • 3 year or 375,000 miles
  • 4 year or 500,000 miles 

 

Call or Text Today 816-517-3333

 Website: https://semitruckinventory.com/

Covered Competent Breakdown Agreement 

KEY TERMS
“VEHICLE” means the covered vehicle described in Section I of the Agreement.
“YOU” and “YOUR” means the Customer shown in Section I of the Agreement.
“WE”, “US” AND “OUR” means the Authorized Administrator shown on the Agreement.
“BREAKDOWN” OR “MECHANICAL BREAKDOWN” means the failure of any original or like replacement part covered by this
Agreement to work as it was originally designed to work in normal service, providing that it has received customary maintenance as
recommended by the manufacturer in the Owner’s Manual. It does not mean the gradual reduction in operating performance due to normal
wear and use when the component is within manufacturer’s tolerance or specifications. A component will be deemed failed when wear
exceeds manufacturer’s tolerances.
“MILES” OR “ODOMETER MILES” means the actual miles your vehicle has traveled as recorded by an unaltered odometer or ECM.
“COSTS” means the usual and fair charges for parts and labor necessary to repair or replace the covered parts. These charges shall not
exceed the manufacturer’s suggested retail (list) price for parts and labor allowances derived from nationally recognized labor time at a
maximum of $125.00 per hour (subject to regional adjustment).
“REPLACEMENT” Replacement parts will be the same quality as the covered parts and may include new, remanufactured or used parts at
Warrantor’s discretion. Once a part(s) is replaced, the failed part(s) then becomes the property of the Warrantor as an exchange for the
replacement part(s), including, if appropriate, the component core.
“DEDUCTIBLE” means the amount that you must pay for covered repairs per component as described in Section E of the General Provisions.
“WARRANTY” means any warranty of the manufacturer, state required dealer warranty or repairer’s guarantee.
“AGREEMENT DATE” means the date you purchased this Agreement.
“REPAIRER” means a franchised dealer or repair facility with ASE or manufacturer recognized certification that provides a written parts and
labor guarantee for repairs to covered components of not less than 180 days or 6,000 miles. Any repairs must receive written authorization in
advance from Gateway Management Services, Ltd., prior to beginning repairs.
“NORMAL WEAR” means the gradual diminishing performance of a component due to normal usage when the component is within the
manufacturer’s tolerance or specifications.
“PROGRESSIVE DAMAGE” refers to all damage that results after, and is related to, the initial failure of a covered component. The initial
failure
must be to a component on the Schedule of Covered Components listed below for coverage to be considered.
“AGREEMENT” OR “CONTRACT” means the Premium 2000 +TM Limited Warranty Agreement that you have purchased to protect your
vehicle.
We will pay the Repairer for reasonable costs to repair or replace any breakdown of the components as listed in Schedule of
Covered Components, less
your deductible and in accordance with the provisions contained within this Agreement. We reserve the right to
inspect
your vehicle to evaluate covered repairs both before and after repairs are made.
“WRAP” allows for manufacturer’s remaining coverage to expire before our coverage begins. Manufacturer’s coverage may expire by time or
miles, in either case
our coverage begins at that moment and extends until expiration of our coverage by time or miles. You can only apply
for coverage through the manufacturer while their coverage is in force. Denial of coverage by the manufacturer while their coverage is in force
will result in denial of coverage by
us.
“OEM (Original Equipment Manufacturer)” means the company who manufactured a component and whose label, model number and serial
number are on the piece of equipment.
“WEAR OUT” The failure of the original or like replacement part covered by this Agreement to work as it was originally designed to work in
normal service. A component will be deemed failed when wear exceeds manufacturers tolerances.
“AUXILIARY POWER UNIT (APU)” Refers to the self contained Auxiliary Power Unit – Engine only.

Call or Text Today 816-517-3333

 Website: https://semitruckinventory.com/

 

extended-warranties-semi-truck-inventory

?

Want to Buy a Semi-Truck

We have thousands of Semi-Trucks for sale all across America.Please fill out this form. Someone will call you soon.

Call Today 816-517-3333

  • Truck Specifics

  • Additional Information

  • This field is for validation purposes and should be left unchanged.